- D Komatsu
- Engine & Related Parts HB205-1/HB215LC-1 Parts komatsu PC270 Parts
English
Home>Products>Komatsu DUCT>Komatsu DUCT 198-911-6690 DUCT
Komatsu DUCT 198-911-6690 DUCT
category
Komatsu DUCT
Komatsu DUCT 198-911-6690 DUCT SPECIFICATIONS
Komatsu DUCT 198-911-6690 DUCT Engineering Calculator , D Komatsu Available Volume Discount Komatsu DUCT Yes (with retaining Bearing Retained Manufacturing Flanged Pilot Type Shape Service . Get Your Free.
- Negotiation
- Negotiation
-
D Komatsu2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Types of Komatsu DUCT
- Flanged Pilot Type
- Available
- Yes (with retaining
- Bearings with Housin
- 6
- Compact Type
- Black Oxide Coating
Komatsu DUCT 198-911-6690 DUCT Frequently purchased together
| Komatsu DUCT 56B-07-12150 DUCT | r1a max:0.6 mm; r1s min:0.6 mm; D6:62.5 mm; d1:59.7 mm; Min operating temperature, Tmin:-30 °C; Axial rigidity:108 N/µm; Preload level:8; B:16 mm; d:50 mm; Characteristic inner ring frequency, BPFI:10.73 Hz; |
| Komatsu DUCT 561-07-82213 DUCT | Characteristic outer ring frequency, BPF0:5.7 Hz; Static load, C0:48.7 kN; Characteristic inner ring frequency, BPFI:8.3 Hz; d1:48 mm; E:64 mm; d:35 mm; Nlim:12,000 rpm; Fatigue limit load, Cu:5.9 kN; da max:43 mm; Max operating temperature, Tmax:120 °C; |
| Komatsu DUCT 17A-54-46192 DUCT | Static load, C0:2.83 kN; Dynamic load, C:5.6 kN; Radial clearance class:C2; rs min:0.3 mm; d:15 mm; da min:17 mm; D:32 mm; Max operating temperature, Tmax:110 °C; da max:19 mm; Brand:NTN; |
| Komatsu DUCT 21T-979-4391 DUCT | Weight:0.87 kg; m:6.5 mm; T min.:-20 °C; T max.:100 °C; G:5/16-24UNF; C1:6.8 mm; SW:3.97 mm; Recommended tightening torque for set screw:8 Nm; S:21.4 mm; r:1.1; |
| Komatsu DUCT 21T-979-4271 DUCT | C:31.85 kN; Recommended tightening torque for set screw:11.5 Nm; Weight:1.35 kg; A2:31 mm; A1:7 mm; T max.:100 °C; J:120.5 mm; B:41.2 mm; Designation of housing:PF209-; C0:20.8 kN; |
| Komatsu DUCT 8293-54-1410 DUCT | T max.:100 °C; Designation of bearing:UC207-23G2; G:M6x1; T min.:-20 °C; S:17.5 mm; C0:15.2 kN; H1:19 mm; s1:21.45 mm; L1:54 mm; H2:94 mm; |
| Komatsu DUCT 154-54-72631 DUCT | Characteristic outer ring frequency, BPF0:5.7 Hz; Static load, C0:48.7 kN; Characteristic inner ring frequency, BPFI:8.3 Hz; d1:48 mm; E:64 mm; d:35 mm; Nlim:12,000 rpm; Fatigue limit load, Cu:5.9 kN; da max:43 mm; Max operating temperature, Tmax:120 °C; |
| Komatsu DUCT 567-07-76310 DUCT ASS'Y | Shape:Front Mount; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Lateral Width L(mm):32; Days to Ship:8 Days; Number of Bearings:Single; Height H(mm):25 ～ 35; |
| Komatsu DUCT 23C-809-5232 DUCT | T max.:100 °C; Designation of bearing:UC207-23G2; G:M6x1; T min.:-20 °C; S:17.5 mm; C0:15.2 kN; H1:19 mm; s1:21.45 mm; L1:54 mm; H2:94 mm; |
| Komatsu DUCT 21T-43-67381 DUCT | r1a max:0.6 mm; r1s min:0.6 mm; D6:62.5 mm; d1:59.7 mm; Min operating temperature, Tmin:-30 °C; Axial rigidity:108 N/µm; Preload level:8; B:16 mm; d:50 mm; Characteristic inner ring frequency, BPFI:10.73 Hz; |
| Komatsu DUCT 198-54-57290 DUCT | d:25.4 mm; H:45 mm; Designation of bearing:EX305-16G2L3; B:34.9 mm; S:16.7 mm; A1:32 mm; L:175 mm; d1:42.8 mm; A:45 mm; Designation of housing:P305-; |
| Komatsu DUCT 198-54-57290 DUCT | B:38.1 mm; Dz:70 mm; Designation of open end cover:SCOU206-19; A1:25 mm; Recommended tightening torque for set screw:3.7 Nm; C0:11.2 kN; Designation of housing:PE206N-; H2:82 mm; H:42.9 mm; N:14mm; |
| Komatsu DUCT 17A-Z11-7590 DUCT | Shape:Front Mount; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Lateral Width L(mm):32; Days to Ship:8 Days; Number of Bearings:Single; Height H(mm):25 ～ 35; |
| Komatsu DUCT 21N-54-41321 DUCT | d:25.4 mm; H:45 mm; Designation of bearing:EX305-16G2L3; B:34.9 mm; S:16.7 mm; A1:32 mm; L:175 mm; d1:42.8 mm; A:45 mm; Designation of housing:P305-; |
| Komatsu DUCT 426-Z84-2970 DUCT | Weight:0.87 kg; m:6.5 mm; T min.:-20 °C; T max.:100 °C; G:5/16-24UNF; C1:6.8 mm; SW:3.97 mm; Recommended tightening torque for set screw:8 Nm; S:21.4 mm; r:1.1; |
| Komatsu DUCT 154-01-31280 DUCT | r1a max:0.6 mm; r1s min:0.6 mm; D6:62.5 mm; d1:59.7 mm; Min operating temperature, Tmin:-30 °C; Axial rigidity:108 N/µm; Preload level:8; B:16 mm; d:50 mm; Characteristic inner ring frequency, BPFI:10.73 Hz; |
Contact Us
- D Komatsu
- Address
- Phone(Working Time)
- Fax
Komatsu DUCT CATEGORIES
- Engine & Related Parts
- HB205-1/HB215LC-1 Parts
- komatsu PC270 Parts
- komatsu PC360-7 Parts
- komatsu PC450-8 parts
- komatsu PC360-8 parts
- komatsu PC56 Parts
- PC70
- PC60-7
- PC110
- PC130
- pc160
- PC200
- PC220
- pc300
- track link assy
- arm boom assy
- Case Slew Drives and Swing Gear Boxes
- Swing Motor-Case Slew Drives and Swing Gear Boxes
- Swing Gear Box
- Slew Drive Assembly-Daewoo/Doosan Slew Drives and Swing Gear Boxes
- TRANSMISSION
- KOMATSU PLATE
- KOMATSU plate
- KOMATSU PLATE 2
- KOMATSU BEAM
- KOMATSU UNIT
- Fiat Hitachi/Kobelco Slew Drives and Swing Gear Boxes
- Hyundai Slew Drives and Swing Gear Boxes
- JCB Slew Drives and Swing Gear Boxes
- JCB Swing Gear Boxes
- John Deere Slew Drives and Swing Gear Boxes
- Kobelco Slew Drives and Swing Gear Boxes
- Kobelco Slew Motor
- Kobelco Swing Gear Boxes
- Komatsu Slew Drives and Swing Gear Boxe
- Komatsu Slew Motor
- komatsu Swing Gear Box
- komatsu Slew Drive Assembly
- Komatsu Slew Motor
- komatsu Swing Gear Box
- Komatsu Engine Fuel Control Motors
- Komatsu Engine crankshaft
- KOMATSU Body assembly
- KOMATSU WIRING HARNESS
- KOMATSU wiring harness
- KOMATSU wiring HARNESS
- KOMATSU WIRING harness
- Cylinder for Komatsu Wheel Loaders
- Seal Kit for Komatsu Wheel Loaders
- komatsu Slew Motor
- Cylinder seal kits and DU Bushings for Komatsu wheeled excavators
- DU Bushings for Komatsu wheeled excavators
- KOMATSU SHAFT
- KOMATSU REPAIR KIT
- KOMATSU OIL COOLER
- KOMATSU CASE ASS'Y
- KOMATSU BUMPER
- KOMATSU TRACK SHOE ASS'
- KOMATSU SWING CIRCLE
- KOMATSU CONVEYOR ASS'Y
- KOMATSU HOSE ASS'Y
- KOMATSU FINAL DRIVE
- KOMATSU CAB ASS'Y
- KOMATSU STEERING ASS'Y
- KOMATSU CASE
- KOMATSU CONVERTER ASS'Y
- KOMATSU ARM
- KOMATSU SEAT
- KOMATSU HOUSING
- KOMATSU CANOPY
- KOMATSU SUSPENSION ASS'
- KOMATSU WHEEL
- KOMATSU CYLINDER ASS'Y
- KOMATSU PIN
- KOMATSU PTO ASS'Y
- KOMATSU LEVER
- KOMATSU LINER
- KOMATSU HOSE
- KOMATSU HOSE
- KOMATSU HOSE
- KOMATSU Gearbox assembly
- KOMATSU TANDEM DRIVE AS
- KOMATSU 9PIPE
- KOMATSU CONVEYOR
- KOMATSU RADIATOR ASS'Y
- KOMATSU PIPE
- KOMATSU CONVERTER
- KOMATSU Brachial assembly
- KOMATSU beam
- KOMATSU Final drive assembly
- KOMATSU Shovel assembly
- KOMATSU Crawler frame
- KOMATSU Cushion assembly
- KOMATSU Engine assembly
- KOMATSU CONTROL VALVE
- KOMATSU Main frame
- KOMATSU Engine assembly
- KOMATSU Brachial (bucket) assembly
- Komatsu Dozer Gear Pumps
- Recoil Spring and Track Adjuster Assembly for Komatsu Excavators
- Recoil Spring and Track Adjuster Assembly for Volvo Excavators
- Recoil Spring and Track Adjuster Assembly
- Komatsu Excavator Main Hydraulic Piston Pump Parts
- Large Komatsu Final Drives
- KOMATSU Chain joint
- KOMATSU JOINT
- KOMATSU Box assembly
- KOMATSU Lifting arm
- KOMATSU SWING MACHINERY
- KOMATSU LINK ASS'Y
- KOMATSU TRACK SHOE
- KOMATSU DIFFERENTIAL AS
- KOMATSU Caterpillar assembly
- KOMATSU Brake assembly
- KOMATSU Curved bend assembly
- KOMATSU TRACK LINK ASS'
- KOMATSU EDGE
- KOMATSU Products
- KOMATSU PRODUCTS
- Komatsu accessories
- Komatsu Accessories
- Komatsu Products
- KOMATSU Products
- Komatsu FENDER
- Komatsu Valve assembly
- Komatsu TURBOCHARGER AS
- Komatsu MAST
- Komatsu Dowel
- Komatsu Case and shell
- Komatsu Piston rod
- Komatsu GRILLE
- Komatsu SUPPORT
- Komatsu harness
- Komatsu GUARD
- Komatsu ROD
- Komatsu ring
- Komatsu Tank (oil / water tank) assembly
- Komatsu STEP
- Komatsu FORK ASS'Y
- Komatsu Portal assembly
- Komatsu box
- Komatsu Inert wheel assembly
- Komatsu IDLER ASS'Y
- Komatsu axis
- Komatsu CYLINDER
- Komatsu cylinder assembly
- Komatsu piston
- Komatsu STEE0 VALVE
- Komatsu HEAD
- Komatsu OUTER
- Komatsu BACK REST
- Komatsu 0 assembly
- Komatsu edge
- Komatsu CONTROL ASS'Y
- Komatsu 90
- Komatsu BOARD
- Komatsu Pillar
- Komatsu DUCT
- Komatsu bracket
- Komatsu Tube assembly
- Komatsu RETAINER
- Komatsu Mandrel assembly
- Komatsu 0D0
- Komatsu tube
- Komatsu STRAINER ASS'Y
- Komatsu pump
- Komatsu DOOR ASS'Y
- Komatsu base
- Komatsu 0 ASS'
- Komatsu SPILL 0
- Komatsu TOOL
- Komatsu TANK
- Komatsu Flange
- Komatsu Turbocharger
- Komatsu GOVERNOR ASS'Y
- Komatsu FUEL 0
- Komatsu Carrier assembly
- Komatsu 0 GEAR
- Komatsu MOTOR
- Komatsu Screw
- Komatsu ROLLER BEA0
- Komatsu VALVE
- Komatsu Chain joint
- Komatsu connecting rod
- Komatsu Brace
- Komatsu FLANGE
- Komatsu radiator
- Komatsu PULLER
- Komatsu SERVICE KIT
- Komatsu Seat assembly
- Komatsu INNER 0
- Komatsu Filter assembly
- Komatsu Disassembly tool
- Komatsu Servo valve assembly
- Komatsu Core
- Komatsu STAY
- Komatsu SENSOR ASS'Y